| Customization: | Available |
|---|---|
| Warranty: | More Than 5 Years |
| Filler: | Concrete Materials, Soil & Rock |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Geocell
|
Cell Depth
|
50mm - 300mm
|
|
Welding Space
|
300mm - 1000mm
|
|
Thickness
|
1.0mm - 1.5mm for smooth geocell
1.3mm - 1.5mm for textured geocell
|
|
Appearance
|
Smooth Textured
|
|
Color
|
Green Black Gray
|
| Dimensional deviation of plastic geocell: | GB/T19274-2003 | ||||||
| NO. | Cell height(H/mm) | Cell sheet thickness | Welding distance | ||||
| Nominal value | Deviation | Nominal value | Nominal value | Deviation | |||
| 1 | H<=100 | ±1 | >=1.1 | 330<=A<800 | ±15 | ||
| 2 | 100<H<=200 | ±2 | |||||
| Technical data for plastic geocell: | GB/T19274-2003 | ||||||
| NO. | Test items | Unit | PP Geocell | PE Geocell | |||
| 1 | Appearance | Cell sheet flat, no bubbles, no grooves | |||||
| 2 | Longitudinal tensile yield strength of the cell | MPa | >=23 | >=20 | |||
| 3 | Tensile strength at joint | N/cm | >=100 | >=100 | |||
| 4 | Tensile strength at joint of cell groups | Edge of cell slice | N/cm | >=200 | >=200 | ||
| 5 | Middle of cell slice | N/cm | >=120 | >=120 | |||
| Q/CR 549.5-2016 | |||||||
| Project | Index | ||||||
| Tensile yield strength,MPa | ≥20 | ||||||
| Yield elongation | ≤15% | ||||||
| Right-angle tear resistance | ≥120,cell thickness is 0.8mm | ||||||
| ≥120,cell thickness is 0.9mm | |||||||
| Time of environmental stress cracking,h | ≥800 | ||||||
| Oxidative induction time,min | ≥20 | ||||||
| Dispersion of carbon black | In the 10 data,level 3 is not more than 1,level 4 and level 5 are not allowed | ||||||
| Carbon black content | ≥2.0% | ||||||
| Peeling strength,N/cm | ≥100 | ||||||
| Tensile strength between geocell slice,N/cm | ≥190 | ||||||
|
Product Type
|
Height (mm)
|
Welding Distance (mm)
|
Thickness(mm)
|
Tensile Strength of Welding Points (N/cm)
|
Tensile Strength of Connection of Cells (N/cm )
|
Tensile Strength at Yield of Each Sheet (MPa)
|
||||||
|
Smooth and Not Perforated
|
50≤H≤300
|
300≤A≤1000
|
1.0 -1.5
|
≥100
|
≥120
|
≥20
|
||||||
|
Smooth and Perforated
|
50≤H≤300
|
300≤A≤1000
|
1.0 -1.5
|
≥100
|
≥120
|
≥20
|
||||||
|
Textured and Not Perforated
|
50≤H≤300
|
300≤A≤1000
|
1.3 -1.5
|
≥100
|
≥120
|
≥20
|
||||||
|
Textured and Perforated
|
50≤H≤300
|
300≤A≤1000
|
1.3 -1.5
|
≥100
|
≥120
|
≥20
|
||||||
|
Remarks:
1. This is a basic technical specification.
2. All of the technical indexes can be reached according to the customers'demand, and the other special standards will be carried out by agreement or contact. |
|
|
|
|
|
|
||||||
){kind=link}